如何减肥成功顺便钓小鲜肉？先定一个能达到的小目标

"Underflow" redirects here. For the condition of attempting to read an empty buffer, see Buffer underrun.

百度 四年来廊坊市累计造林167万亩，到去年底，该市森林覆盖率已达到31%，居河北省平原市之首，今年廊坊市将在全市营造百万亩平原森林。

The term arithmetic underflow (also floating-point underflow, or just underflow) is a condition in a computer program where the result of a calculation is a number of more precise absolute value than the computer can actually represent in memory on its central processing unit (CPU).

Arithmetic underflow can occur when the true result of a floating-point operation is smaller in magnitude (that is, closer to zero) than the smallest value representable as a normal floating-point number in the target datatype. Underflow can in part be regarded as negative overflow of the exponent of the floating-point value. For example, if the exponent part can represent values from ?128 to 127, then a result with a value less than ?128 may cause underflow.

Underflow gap

The interval between ?fminN and fminN, where fminN is the smallest positive normal floating-point value, is called the underflow gap. This is because the size of this interval is many orders of magnitude larger than the distance between adjacent normal floating-point values just outside the gap. For instance, if the floating-point datatype can represent 20 bits, the underflow gap is 2²¹ times larger than the absolute distance between adjacent floating-point values just outside the gap.

In older designs, the underflow gap had just one usable value, zero. When an underflow occurred, the true result was replaced by zero (either directly by the hardware, or by system software handling the primary underflow condition). This replacement is called "flush to zero".

The 1984 edition of IEEE 754 introduced subnormal numbers. The subnormal numbers (including zero) fill the underflow gap with values where the absolute distance between adjacent values is the same as for adjacent values just outside the underflow gap. This enables "gradual underflow", where a nearest subnormal value is used, just as a nearest normal value is used when possible. Even when using gradual underflow, the nearest value may be zero.

The absolute distance between adjacent floating-point values just outside the gap is called the machine epsilon, typically characterized by the largest value whose sum with the value 1 will result in the answer with value 1 in that floating-point scheme. This is the maximum value of $\epsilon$ that satisfies $\operatorname {fl} (1+\epsilon )=\operatorname {fl} (1)$, where $\operatorname {fl}$ is a function which converts the real value into the floating-point representation. While the machine epsilon is not to be confused with the underflow level (assuming subnormal numbers), it is closely related. The machine epsilon is dependent on the number of bits which make up the significand, whereas the underflow level depends on the number of digits which make up the exponent field. In most floating-point systems, the underflow level is smaller than the machine epsilon.

Handling of underflow

The occurrence of an underflow may set a ("sticky") status bit, raise an exception, at the hardware level generate an interrupt, or may cause some combination of these effects.

As specified in IEEE 754, the underflow condition is only signaled if there is also a loss of precision. Typically this is determined as the final result being inexact. However, if the user is trapping on underflow, this may happen regardless of consideration for loss of precision. The default handling in IEEE 754 for underflow (as well as other exceptions) is to record as a floating-point status that underflow has occurred. This is specified for the application-programming level, but often also interpreted as how to handle it at the hardware level.

See also

• Denormal number
• Floating-point arithmetic
• IEEE 754
• Integer overflow
• Logarithmic number system
• Machine epsilon
• Normal number (computing)